https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Plug component, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm,
Connection method: Screw connection with tension sleeve, Color: green, Contact surface: Tin
The figure shows a 10-position
version of the product
Why buy this product
Plug-in direction parallel to the conductor axis
Individual position coding by inserting coding profiles
Standard plug-in system for 320 V (III/2)
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4017918039912
Weight per Piece (excluding packing)
14.160 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Environmental Product Compliance
China RoHS
Hazardous substances above threshold values;
Environmentally Friendly Use Period = 50;
For details go to tab “Downloads”, Category “Manufacturer's declaration”
Dimensions
Width
50.65 mm
Pitch
5.08 mm
Dimension a
35.56 mm
General
09/19/2016 Page 1 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Technical data
General
Range of articles
MSTB 2,5/..-STF
Type of contact
Female connector
Number of positions
8
Connection method
Screw connection with tension sleeve
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
12 A
Nominal cross section
2.5 mm²
Maximum load current
12 A (with a 2.5 mm² conductor cross section)
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
7 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
09/19/2016 Page 2 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Technical data
Connection data
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
Minimum AWG according to UL/CUL
30
Maximum AWG according to UL/CUL
12
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
Flammability rating according to UL 94
V0
Drawings
Diagram
12
10
8
6
= 2-pos.
= 5-pos.
! = 12-pos.
" = 20-pos.
4
2
0
0
20
!
24
Current strength [A]
Current strength [A]
Diagram
"
20
16
!
"
#
12
8
!= 2-pos.
" = 5-pos.
# = 12-pos.
4
0
40
60
80
100
0
Ambient temperature [°C]
10
20
30
40
50
60
70
80
90 100 110
Ambient temperature [°C]
Type: MSTB 2,5/...-STF-5,08 with MSTBV 2,5/...-GF-5,08
Type: MSTB 2,5/...-STF-5,08 with CC 2,5/...-GF-5,08 P26THR
Dimensional drawing
4,7
a+5,69
15
18,2
8,3
5,08
5,08
a
Classifications
eCl@ss
eCl@ss 4.0
272607xx
eCl@ss 4.1
27260701
eCl@ss 5.0
27260701
eCl@ss 5.1
27260701
eCl@ss 6.0
27260704
09/19/2016 Page 3 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Classifications
eCl@ss
eCl@ss 7.0
27440402
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
ETIM 5.0
EC002638
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
Approvals
Approvals
Approvals
CSA / VDE Gutachten mit Fertigungsüberwachung / GL / RS / IECEE CB Scheme / EAC / cULus Recognized / EAC
Ex Approvals
Approval details
CSA
http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631
B
D
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
15 A
10 A
Nominal voltage UN
300 V
300 V
VDE Gutachten mit Fertigungsüberwachung
http://www.vde.de 40004701
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
09/19/2016 Page 4 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Approvals
Nominal voltage UN
250 V
GL http://www.gl-group.com/newbuilding/approvals/index.html 5032089 HH
RS http://www.rs-head.spb.ru/en/index.php 10.04059.250
IECEE CB Scheme
http://www.iecee.org/ DE1-56062-B1B2
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
EAC EAC-Zulassung
cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931011
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
15 A
15 A
Nominal voltage UN
300 V
150 V
EAC B.01742
Accessories
Accessories
Bridge
Insertion bridge - EBP 2- 5 - 1733169
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2
09/19/2016 Page 5 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Insertion bridge - EBP 4- 5 - 1733185
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 4
Insertion bridge - EBP 5- 5 - 1733198
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 5
Insertion bridge - EBP 3- 5 - 1733172
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 3
Insertion bridge - EBP 6- 5 - 1733208
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 6
Coding element
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Labeled terminal marker
09/19/2016 Page 6 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35
mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100
mm, 2-component grip, with non-slip grip
Terminal marking
Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906
Marker card, Sheet, white, unlabeled, can be labeled with: Plotter, Office printing systems, Mounting type: Adhesive,
Lettering field: 186 x 3.8 mm
Additional products
09/19/2016 Page 7 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Base strip - MSTB 2,5/ 8-GF-5,08 - 1776566
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTBV 2,5/ 8-GF-5,08 - 1777138
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MDSTB 2,5/ 8-GF-5,08 - 1842429
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBV 2,5/ 8-GF-5,08 - 1845691
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - DFK-MSTBA 2,5/ 8-GF-5,08 - 1899045
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
09/19/2016 Page 8 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Base strip - DFK-MSTBVA 2,5/ 8-GF-5,08 - 1899346
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - EMSTB 2,5/ 8-GF-5,08 - 1899676
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Press-in technology
Base strip - EMSTBV 2,5/ 8-GF-5,08 - 1915275
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Press-in technology
Base strip - MSTB 2,5/ 8-GF-5,08 THT - 1927629
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Base strip - MSTBV 2,5/ 8-GF-5,08 THT - 1940952
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
09/19/2016 Page 9 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Printed-circuit board connector - CC 2,5/ 8-GF-5,08 P26THR - 1954757
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 8-GF-5,08 P26THRR88 - 1954867
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 8-GF-5,08 P26THR - 1955691
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 8-GF-5,08 P26THRR88 - 1955808
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 8-GFL-5,08P26THR - 1956328
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
09/19/2016 Page 10 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Printed-circuit board connector - CC 2,5/ 8-GFL-5,08P26THRR88 - 1956399
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CC 2,5/ 8-GFR-5,08P26THR - 1956467
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CC 2,5/ 8-GFR-5,08P26THRR88 - 1956535
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCV 2,5/ 8-GFL-5,08P26THR - 1959684
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCV 2,5/ 8-GFL-5,08P26THRR88 - 1959752
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
09/19/2016 Page 11 / 12
https://www.phoenixcontact.com/gb/products/1778043
Printed-circuit board connector - MSTB 2,5/ 8-STF-5,08 - 1778043
Accessories
Printed-circuit board connector - CCV 2,5/ 8-GFR-5,08P26THR - 1959820
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCV 2,5/ 8-GFR-5,08P26THRR88 - 1959891
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/19/2016 Page 12 / 12
工商网监
湘ICP备2023018690号